asphalt thickness for driveway

  • Asphalt Driveway Thickness - How Thick Should An Asphalt

    The reputable contractors in your area will know what the proper thickness the asphalt should be for your driveway. And as the saying goes your asphalt driveway is only

  • Driveways - Asphalt Pavement

    "We recommend full-depth asphalt for driveways," says Kent Hansen, former NAPA Director of Engineering. "We calculate that asphalt can replace aggregate on a ratio of 1:3 in thickness. That is, 1 inch of asphalt pavement is equivalent to 3

  • How to Install a Durable Asphalt Driveway | Family Handyman

    In most parts of the country, the asphalt laid over a properly prepared aggregate base should be 2 to 3 in. thick. If you opt for a 3-in. thick surface, you can use the coarse asphalt mix for a 2-in. thick bottom layer for strength, and a 1-in. thick layer of the finer mix on the surface for a better appearance. Required Materials for this Project

  • Asphalt Thickness - Richfield Blacktop

    Asphalt paving is applied with paving machines that apply an even thickness of the asphalt paving material. That application is called a “lift,” by pavers. Ranging from 2 ½” to 3″ thick, each lift is compacted after application by a heavy roller compactor.

  • Asphalt Pavement Thickness and Mix Design FAQs

    MIX AND THICKNESS DESIGN : Q: For an asphalt pavement in a container terminal, is there any rules of thumb as to what the maximum load could be without causing damage?

  • What makes a good asphalt driveway? | Asphalt

    What makes a good asphalt driveway? There are some key considerations in having a good asphalt driveway. “The size or thickness of the rock makes a

  • Residential Driveways - Virginia Asphalt Association

    The information contained in this chapter is intended as a general guide for the homeowner on the design and construction of asphalt concrete residential driveways. These driveways are simple and economical to build, and a driveway that is correctly designed and constructed will give many years of service with little or no maintenance.

  • How thick is asphalt in a driveway - Answers.com

    Over that is laid the asphalt anywhere from 1.5" to 3" in thickness. The asphalt driveway needs to be sealed at least every three years, more often in severe weather climates.

  • For blacktop, it pays to lay gravel on thick

    07/06/2002· Q. We are building a new home and installing a blacktop driveway. There is conflicting information in the bids. One contractor wants to install a 3-inch

  • What makes a good asphalt driveway? | Asphalt

    What makes a good asphalt driveway? There are some key considerations in having a good asphalt driveway. “The size or thickness of the rock makes a

  • Asphalt Pavement Guide: Thickness | EastCoat Pavement Services

    EastCoat Pavement Services. Asphalt Pavement Guide: Thickness. Asphalt Thickness: Residential – Asphalt driveways need to be a minimum of 2” thick

  • Concrete Thickness - All About Driveways

    Concrete thickness is a very important part of the installation of a concrete driveway. Pour it too thin and you'll be replacing the driveway too soon!

  • Asphalt Driveway Costs - Howmuch.net

    Average cost to install asphalt driveway is about $10,047 (2,900 sq.ft. asphalt drive). Find here detailed information about asphalt driveway costs.

  • Driveway Specification For Thickness Of Asphalt Paving

    Driveway Specifications - The specification that many cities use for driveway construction is 4-inch minimum of compacted stone base and a 2-inch minimum.

  • Pros and Cons: Asphalt vs. Concrete Driveway | Angie's

    A basic asphalt driveway costs about $2 to $5 per square foot, according to CostHelper.com. That amounts to $720 to $1,800 for a basic standard-size residential, two-car asphalt driveway measuring 18 feet wide and 20 feet long.

  • Ask Your Question - Angie's List Answers

    Ask Your Question. Angie's List Answers The depth of excavation for driveways is generally to firm, The asphalt paving can be as thin as 2 inches,